Please use this identifier to cite or link to this item: http://nopr.niscpr.res.in/handle/123456789/24645
Full metadata record
DC FieldValueLanguage
dc.contributor.authorOrtlek, H G-
dc.contributor.authorUlku, S-
dc.date.accessioned2013-12-11T08:28:10Z-
dc.date.available2013-12-11T08:28:10Z-
dc.date.issued2004-09-
dc.identifier.issn0975-1025 (Online); 0971-0426 (Print)-
dc.identifier.urihttp://hdl.handle.net/123456789/24645-
dc.description353-356en_US
dc.description.abstractThe effect of material type, pile length and twisting rate on the abrasion properties of chenille yarns has been studied. Twenty seven different chenille yarns have been produced using three different twist levels (800, 850 and 900 twists/m) and three different pile lengths (0.7, 0.8 and 1.0 mm) from three different materials (cotton, viscose and acrylic) and then used as weft yarn for producing upholstery fabrics. It is observed that the malarial type, twist level and pile length have significant effect on the abrasion resistance of chenille yarns. The abrasion resistance of cotton chenille yarns is found to be higher followed by the acrylic chenille yarns and viscose chenille yarns.en_US
dc.language.isoen_USen_US
dc.publisherNISCAIR-CSIR, Indiaen_US
dc.relation.ispartofseriesInt. Cl.7 D02G 3/42, D06H 3/00en_US
dc.rights CC Attribution-Noncommercial-No Derivative Works 2.5 Indiaen_US
dc.sourceIJFTR Vol.29(3) [September 2004]en_US
dc.subjectAbrasion resistanceen_US
dc.subjectAcrylic yarnen_US
dc.subjectChenille yarnen_US
dc.subjectCotton yarnen_US
dc.subjectPile lengthen_US
dc.subjectTwist levelen_US
dc.subjectViscose yarnen_US
dc.titleFactors influencing the abrasion properties of chenille yarnsen_US
dc.typeArticleen_US
Appears in Collections:IJFTR Vol.29(3) [September 2004]

Files in This Item:
File Description SizeFormat 
IJFTR 29(3) 353-356.pdf774.09 kBAdobe PDFView/Open


Items in NOPR are protected by copyright, with all rights reserved, unless otherwise indicated.