Please use this identifier to cite or link to this item:
http://nopr.niscpr.res.in/handle/123456789/30403Full metadata record
| DC Field | Value | Language |
|---|---|---|
| dc.contributor.author | Ansari, Akhter H | - |
| dc.contributor.author | Hameedullah, M | - |
| dc.contributor.author | Asghar, M S J | - |
| dc.date.accessioned | 2015-01-19T05:48:11Z | - |
| dc.date.available | 2015-01-19T05:48:11Z | - |
| dc.date.issued | 2004-12 | - |
| dc.identifier.issn | 0975-1017 (Online); 0971-4588 (Print) | - |
| dc.identifier.uri | http://hdl.handle.net/123456789/30403 | - |
| dc.description | 481-486 | en_US |
| dc.description.abstract | Powder metallurgy components are manufactured by compacting metal powders. Hence, compaction pressure affects the properties of the components. In the present case, pre-alloyed cartridge brass (70:30) powder is employed for investigation and the effect of compaction pressure on dimensional properties of components is studied. A volumetric shrinkage is observed at various levels of compaction pressure. The shrinkage reduces with an increase in compaction pressure. It is 1.0% at 242 MPa, which reduces further to 0.4% at 725 MPa. At high level of compaction pressure, the shrinkage is found along the diameter. A swelling of 1.0% in diameter is exhibited at low level. | en_US |
| dc.language.iso | en_US | en_US |
| dc.publisher | NISCAIR-CSIR, India | en_US |
| dc.relation.ispartofseries | Int. Cl.7 B22F 3/02 | en_US |
| dc.rights |  CC Attribution-Noncommercial-No Derivative Works 2.5 India | en_US |
| dc.source | IJEMS Vol.11(6) [December 2004] | en_US |
| dc.title | Stabilising dimensions of brass powder components | en_US |
| dc.type | Article | en_US |
| Appears in Collections: | IJEMS Vol.11(6) [December 2004] | |
Files in This Item:
| File | Description | Size | Format | |
|---|---|---|---|---|
| IJEMS 11(6) 481-486.pdf | 1.36 MB | Adobe PDF | View/Open |
Items in NOPR are protected by copyright, with all rights reserved, unless otherwise indicated.