Please use this identifier to cite or link to this item: http://nopr.niscpr.res.in/handle/123456789/32529
Full metadata record
DC FieldValueLanguage
dc.contributor.authorRajagopal, K B-
dc.contributor.authorIyer, K R Krishna-
dc.date.accessioned2015-10-06T09:44:42Z-
dc.date.available2015-10-06T09:44:42Z-
dc.date.issued1991-06-
dc.identifier.issn0975-1025 (Online); 0971-0426 (Print)-
dc.identifier.urihttp://hdl.handle.net/123456789/32529-
dc.description178-180en_US
dc.description.abstractThirteen samples of palmyra fibres were tested for flexural stiffness using a simple experimental set-up. A parallel array of fibres was supported at the ends on a pair of knife-edges and loaded in the middle. The load applied and the depression produced at the midpoint were measured by dial gauges that formed parts of a fabric compressibility tester.The stiffness determined in this manner was found to have good correspondence with fibre linear density. This result has led to the conclusion that the trade practice of grading palmyra fibres according to linear density is adequate for a classification with respect to stiffness as well.en_US
dc.language.isoen_USen_US
dc.publisherNISCAIR-CSIR, Indiaen_US
dc.rights CC Attribution-Noncommercial-No Derivative Works 2.5 Indiaen_US
dc.sourceIJFTR Vol.16(2) [June 1991]en_US
dc.subjectB. fiabellifer Linn.en_US
dc.subjectFlexural stiffnessen_US
dc.subjectLinear densityen_US
dc.subjectPalmyra fibreen_US
dc.titleFlexural stiffness and linear density of palmyra fibresen_US
dc.typeArticleen_US
Appears in Collections:IJFTR Vol.16(2) [June 1991]

Files in This Item:
File Description SizeFormat 
IJFTR 16(2) 178-180.pdf190.39 kBAdobe PDFView/Open


Items in NOPR are protected by copyright, with all rights reserved, unless otherwise indicated.