Please use this identifier to cite or link to this item:
http://nopr.niscpr.res.in/handle/123456789/33291Full metadata record
| DC Field | Value | Language |
|---|---|---|
| dc.contributor.author | Singh, R K | - |
| dc.contributor.author | Gupta, V B | - |
| dc.date.accessioned | 2015-11-13T05:57:48Z | - |
| dc.date.available | 2015-11-13T05:57:48Z | - |
| dc.date.issued | 1979-06 | - |
| dc.identifier.issn | 0975-1025 (Online); 0971-0426 (Print) | - |
| dc.identifier.uri | http://hdl.handle.net/123456789/33291 | - |
| dc.description | 74-76 | en_US |
| dc.description.abstract | Plastic grade nylon-6 granules were compounded with 6 mm long chopped glass fibre strands on an extruder and the reinforced pellets obtained were injection-moulded into test specimen. With the incorporation of 30% by weight of glass fibre, the tensile strength improves by a factor of more than 2 and the tensile modulus by a factor close to 3; the heat distortion temperature also shows a three-fold increase. The elongation-at-break is reduced considerably and the shrinkage in the mould is also reduced. Thus, the composite has the properties of a good engineering plastic. | en_US |
| dc.language.iso | en_US | en_US |
| dc.publisher | NISCAIR-CSIR, India | en_US |
| dc.rights |  CC Attribution-Noncommercial-No Derivative Works 2.5 India | en_US |
| dc.source | IJFTR Vol.04(2) [June 1979] | en_US |
| dc.title | Studies on Short Glass Fibre Reinforced Nylon 6: Compounding, Moulding and Characterization | en_US |
| dc.type | Article | en_US |
| Appears in Collections: | IJFTR Vol.04(2) [June 1979] | |
Files in This Item:
| File | Description | Size | Format | |
|---|---|---|---|---|
| IJFTR 4(2) 74-76.pdf | 549.68 kB | Adobe PDF | View/Open |
Items in NOPR are protected by copyright, with all rights reserved, unless otherwise indicated.