Please use this identifier to cite or link to this item:
http://nopr.niscpr.res.in/handle/123456789/33291| Title: | Studies on Short Glass Fibre Reinforced Nylon 6: Compounding, Moulding and Characterization |
| Authors: | Singh, R K Gupta, V B |
| Issue Date: | Jun-1979 |
| Publisher: | NISCAIR-CSIR, India |
| Abstract: | Plastic grade nylon-6 granules were compounded with 6 mm long chopped glass fibre strands on an extruder and the reinforced pellets obtained were injection-moulded into test specimen. With the incorporation of 30% by weight of glass fibre, the tensile strength improves by a factor of more than 2 and the tensile modulus by a factor close to 3; the heat distortion temperature also shows a three-fold increase. The elongation-at-break is reduced considerably and the shrinkage in the mould is also reduced. Thus, the composite has the properties of a good engineering plastic. |
| Page(s): | 74-76 |
| ISSN: | 0975-1025 (Online); 0971-0426 (Print) |
| Appears in Collections: | IJFTR Vol.04(2) [June 1979] |
Files in This Item:
| File | Description | Size | Format | |
|---|---|---|---|---|
| IJFTR 4(2) 74-76.pdf | 549.68 kB | Adobe PDF | View/Open |
Items in NOPR are protected by copyright, with all rights reserved, unless otherwise indicated.